![]() Then, they’ll lift the skimmer lid and pull out the skimmer basket. The first step is for the homeowner to turn off the pump. Since frequent pump replacement is an unwelcome and unexpected inground pool cost, it’s an issue that can be avoided by taking care of regular maintenance. The skimmer basket will need to be cleaned at least once a week to prevent clogs, which can significantly reduce the lifespan of the pump. STEP 6: Clean the skimmer basket.Ī pool’s skimmer catches any fallen leaves, bugs, or even small animals that make their way into the pool and collects them in the skimmer basket. A cartridge filter will need to be replaced every 3 to 5 years, diatomaceous earth filters should be replaced annually, and a sand filter must be replaced every 5 years. ![]() If the pump filter looks dirty, homeowners can use a filter cleaner to remove the scum or replace it. That’s an indication that significant buildup has occurred and needs to be flushed. Each of these will need to be backwashed as often as the filter reads 8 to 10 psi (pounds per square inch) higher than usual. ![]() There are three main types of pool filter: cartridge, diatomaceous earth, and sand. Photo: STEP 5: Backwash the filter and clean the pump filter.īackwashing a filter is a regular task that helps push all the built-up sediments out through the waste line and drain, so they don’t remain in the filter. Avoid mixing pool, spa, and household chemicals.Store chemicals according to manufacturers’ recommendations.Adhere to pool chemical dosage recommendations to prevent skin burns in the pool.Wear nonslip shoes when cleaning the pool to avoid accidentally falling in.Use gloves and safety glasses when handling pool chemicals to avoid skin irritation.Clean the filter twice a year and replace it every 1 or 2 years.Run the pool filter for at least 8 hours each day to keep the water circulating and prevent algae buildup.Keep all chemicals on hand so you can quickly treat a problem.Establish daily, weekly, monthly, and yearly schedules for cleaning or treating the pool and replacing old parts.Additionally, broken pumps or filters will need to be repaired or replaced by pool service companies to get the pool back on track. Without the proper testing kits or tools to clean the pool, it can be challenging to identify how to maintain the pool and how to raise pH in the pool to bring back clean water. All of these situations can quickly alter the pH level or chemical balance of a pool. Microscopic elements blow into the pool, trees drop pollen and leaves, storms bring heavy rains, humans introduce oils, and frogs or birds enjoy taking a dip in the pool. DIY pool maintenance can be tricky and involves keeping chemicals properly balanced and preventing murky or algae-filled water.
0 Comments
Leave a Reply. |